If all else fails, read the instructions!?
Instructions for slap-band use.
The Slap-band is straightened by unrolling and stretching flat (reflective side up) and then pinching with your thumbs at the extremities, you'll hear a little 'click' and notice the band is now straight and slightly concave. Now 'slap it' around your wrist, upper arm or ankle to wear.
Once straight, don't attempt to bend it around the wrong way as this may hurt it..ouch!
If the slap is damaged then it's time to bin it for a new one. And to save your curiosity there is a thin metal strip inside so don't open it and play with it as it may be sharp - as for washing, don't even think about putting it in the dishwasher. A little water and cloth will do it.
Instructions for spoke thingies.
If you look closely at these little beauties you'll see that the two ends are slightly flared.
Holding the piece, put the end opening onto the spoke at an angle and gently but firmly push down onto the spoke, the rest should just follow and slide in. Don't try and start from the middle as this is the most narrow section. Decorate to your hearts' content - but is one packet enough?!
|
